Anwendungen

Erfahren Sie mehr über Vakuum-Technologien in Industrie- und Laboröfen, in der Luft- und Raumfahrt, in der Automobilbranche und in der Medizin.

Vacuum sintering of stainless steels: how to choose the right sintering atmosphere

Stainless-steel components represent a large part of the market for sintered parts; they can be produced using many technologies and have a wide variety of applications such as automotive, biomedical industries, mechanical and fashion.

In this article we are going to discuss how sintering parameters, and especially the sintering atmosphere, may affect the quality achievable from sintered stainless-steel parts.
We’ll analyse the three gas options, and we’ll see that in some circumstances there are interesting alternatives that can fit your needs. Read on!

Ganzen Artikel lesen...

Veröffentlicht am 9/11/2020
Kategorien: Anwendungen

How to properly debind parts produced by metal additive manufacturing

Additive manufacturing is a manufacturing technology that is gaining more and more ground among metallurgists. The process involves all the techniques used to create 3D metal objects from a digital design.

The notable increase in the world of metal additive manufacturing of the use of methods such as the Metal Injection Molding (MIM), the Binder Jetting (BJ) and the Fused Deposition Modeling (FDM), prompted TAV VACUUM FURNACES to design and install a vacuum furnace for thermal debinding in its Research and Development laboratory, in order to experiment the best solutions for this delicate post-production phase.

Let's find out what debinding is, how it is obtained and above all which are the most suitable tools to create high quality components without risking contamination.

Ganzen Artikel lesen...

Veröffentlicht am 2/18/2020
Kategorien: Anwendungen

Learn all about coating the additive manufactured Titanium64 [2/2]

In the previous article we’ve seen how AlTiN thin film deposition process was carried out via reactive Physical Vapor Deposition High-Power Impulse Magnetron Sputtering (PVD HiPIMS) to coat Ti6Al4V substrates, realized via Selective Laser Melting (SLM).
Two different SLM process conditions were employed for modifying the obtained part surface morphology and, later, the samples were heat-treated under high vacuum.

Do not miss this in-depth investigation and the conclusions at the end, we’ll provide you all the information to get the most out of these three technologies.

Ganzen Artikel lesen...

Veröffentlicht am 1/21/2020
Kategorien: Anwendungen

Learn all about coating the additive manufactured Titanium64 [1/2]

Among the industrial AM technologies, selective laser melting (SLM) is the most widespread, thanks to its process stability and its favorable ratio between costs and part quality. However, selective laser melted products require coatings for functionalizing the surface with extra properties and in this article we’ll see how thin film deposition process can be carried out to coat titanium substrates.

Is it possible to coat the titanium alloy substrates to obtain a good improvement of the mechanical surface features?
What’s the role of vacuum heat treatments on additive manufactured parts?
Can the laser scanning paths affect the resulting adhesion of the coatings?

Ganzen Artikel lesen...

Veröffentlicht am 10/14/2019
Kategorien: Anwendungen

Sintering for microextrusion? Results on micro bi-lumen tubes

Microextrusion technology is a valid alternative to produce micro components with complex features and tight tolerances.
Microextrusion of plastics represents a solution for some industrial applications such as in the biomedical field, despite its many challenging aspects.

Let's analyze all the process chain improvements in order to develop new monitoring and control methods for improving the final part quality.

Ganzen Artikel lesen...

Würden Sie gerne ein bestimmtes Thema auf diesem Blog behandelt sehen?

Wenn Sie Ideen für einen Artikel haben oder uns einfach nur etwas fragen möchten, wir sind ganz Ohr.