应用

深入了解工业或实验熔炉(包括航空航天、汽车和医疗领域)的真空技术应用
发布日期 2/18/2020
类别: 应用

Learn all about coating the additive manufactured Titanium64 #2

In the previous article we’ve seen how AlTiN thin film deposition process was carried out via reactive Physical Vapor Deposition High-Power Impulse Magnetron Sputtering (PVD HiPIMS) to coat Ti6Al4V substrates, realized via Selective Laser Melting (SLM).
Two different SLM process conditions were employed for modifying the obtained part surface morphology and, later, the samples were heat-treated under high vacuum.

Do not miss this in-depth investigation and the conclusions at the end, we’ll provide you all the information to get the most out of these three technologies.

...阅读所有文章。

发布日期 1/21/2020
类别: 应用

Learn all about coating the additive manufactured Titanium64 #1

Among the industrial AM technologies, selective laser melting (SLM) is the most widespread, thanks to its process stability and its favorable ratio between costs and part quality. However, selective laser melted products require coatings for functionalizing the surface with extra properties and in this article we’ll see how thin film deposition process can be carried out to coat titanium substrates.

Is it possible to coat the titanium alloy substrates to obtain a good improvement of the mechanical surface features?
What’s the role of vacuum heat treatments on additive manufactured parts?
Can the laser scanning paths affect the resulting adhesion of the coatings?

...阅读所有文章。

发布日期 10/14/2019
类别: 应用

Sintering for microextrusion? Results on micro bi-lumen tubes

Microextrusion technology is a valid alternative to produce micro components with complex features and tight tolerances.
Microextrusion of plastics represents a solution for some industrial applications such as in the biomedical field, despite its many challenging aspects.

Let's analyze all the process chain improvements in order to develop new monitoring and control methods for improving the final part quality.

...阅读所有文章。

发布日期 9/10/2019
类别: 应用

Why heat treating metals after additive manufacturing?

Additive Manufacturing means any technology capable of obtaining a final component starting from a 3D CAD file and adding material layer by layer. At a theoretical level, Additive Manufacturing only coincides with the 3D part construction phase. In reality, in order to fully understand this technology, a series of other preprinting and postprinting activities must be considered, which constitute the entire supply chain of Additive Manufacturing.

Read the article and discover the activities that precede and follow 3D printing, paying particular attention to the requirements of the materials and the processes necessary to obtain a high quality production.

...阅读所有文章。

发布日期 8/14/2019
类别: 应用

Steel additive manufacturing: a study on corrosion resistance

The mechanical characteristics and the density of the pieces produced by additive manufacturing with stainless steels have long been studied and are currently very high, that is, similar if not higher than those of traditionally manufactured parts.
Their resistance to corrosion is less well known and investigated.

To investigate the corrosion behavior, the Metallurgy section of the Department of Chemistry and Industrial Chemistry (DCCI) of the University of Genoa in collaboration with TAV VACUUM FURNACES, the Saiem Srl company and the CNR-ICMATE of Padua started the study of steel samples made using the SLM technique (Selective Laser Melting).

Let's discover the interesting laboratory results.

...阅读所有文章。

您是否想要了解本篇博客谈到的某个话题?

如果您对某篇文章有任何看法或有任何问题咨询,我们都非常欢迎。