金属热区

如何选择正确的热防护绝缘
用多层金属防护罩构造的全金属热区的利与弊。
发布日期 2/18/2020
类别: 应用

Learn all about coating the additive manufactured Titanium64 [2/2]

In the previous article we’ve seen how AlTiN thin film deposition process was carried out via reactive Physical Vapor Deposition High-Power Impulse Magnetron Sputtering (PVD HiPIMS) to coat Ti6Al4V substrates, realized via Selective Laser Melting (SLM).
Two different SLM process conditions were employed for modifying the obtained part surface morphology and, later, the samples were heat-treated under high vacuum.

Do not miss this in-depth investigation and the conclusions at the end, we’ll provide you all the information to get the most out of these three technologies.

阅读文章...

发布日期 1/21/2020
类别: 应用

Learn all about coating the additive manufactured Titanium64 [1/2]

Among the industrial AM technologies, selective laser melting (SLM) is the most widespread, thanks to its process stability and its favorable ratio between costs and part quality. However, selective laser melted products require coatings for functionalizing the surface with extra properties and in this article we’ll see how thin film deposition process can be carried out to coat titanium substrates.

Is it possible to coat the titanium alloy substrates to obtain a good improvement of the mechanical surface features?
What’s the role of vacuum heat treatments on additive manufactured parts?
Can the laser scanning paths affect the resulting adhesion of the coatings?

阅读文章...

[FREE eBook] The vacuum furnace buyers guide

This clear and useful eBook will guide you in deciding the features you need for your next vacuum furnace.
Starting from the scratch it will also help you to understand what a vacuum furnace is and whether you need it or not.

Power, isolation, pumping units, heat exchangers and much more explained in simple words for the first time.
Make sure you read the eBook before your next purchase!

阅读文章...

发布日期 4/9/2019
类别: 应用

Selective Laser Melting: obtaining the best fatigue performance

How do vacuum heat treatments affect the fatigue performance of components made with Selective Laser Melting technology?

We will analyze the relevant improvements obtained on products for the aerospace, medical and automotive sectors, thanks to the vacuum furnace posts‑processes of the components made with additive manufacturing (SLM).
Looking at the figures, we will conclude by exposing the interesting experimental results obtained in laboratory, thanks to a fruitful collaboration with an important university campus.

阅读文章...

您是否想要了解本篇博客谈到的某个话题?

如果您对某篇文章有任何看法或有任何问题咨询,我们都非常欢迎。