行家诀窍

有关运用真空炉实现顺畅热处理工艺的专家建议。继续阅读以获知实用提示和诀窍!
发布日期 2/13/2017
类别: 行家诀窍

Roughing pump in high-vacuum furnaces for beginners [2/2]

This is the second part of the article on roughing pump operation in high-vacuum furnaces. It gives an overall picture of the situations due to malfunction of the pumping system. Nonetheless, it provides practical tips on how to deal with the presence of water in the pump, the formation of oil sludge, and the improper use of lubricated roughing pumps.

阅读文章...

发布日期 1/26/2017
类别: 行家诀窍

Roughing pump in high-vacuum furnaces for beginners [1/2]

For maximum performance and reliability, it is necessary to know how the pumping system of your furnace operates, the pros and cons of the different types of vacuum pumps. This is the first part of an article on roughing pump operation in high vacuum furnaces. Understanding how it works is the first step to make the right choices that will take into account also the reduction in operating costs.

阅读文章...

Hot-wall vs cold-wall vacuum furnaces: which one to choose

The demands of heat treatment industry are for higher temperatures, lower pressures, rapid heating and cooling capabilities, and higher production rates.  This has inevitably led to the use of so-called “cold-wall” vacuum furnaces, to the detriment of hot-wall furnaces, which are now considered obsolete. So, let’s see hot-wall and cold-wall furnaces - what could these be and how do they differ from each other?

阅读文章...

发布日期 12/16/2016
类别: 行家诀窍

Vacuum furnace hot zone: graphite vs all-metal design [2/2]

Keeping furnace downtime to an absolute minimum also means to be able to make the right choice of hot zone. In fact, the hot zone contributes to the performance of the whole system. It has an impact on the process quality, the temperature uniformity, the heating and cooling rates and the furnace's energy consumption. Therefore, which is the hot zone most economical and best performing based on losses and overall power costs? Graphite-based or all-metal design?

阅读文章...

发布日期 12/12/2016
类别: 行家诀窍

Vacuum furnace hot zone: graphite vs all-metal design [1/2]

Molybdenum and graphite are the most popular choices as hearth materials in vacuum furnaces. Throughout the last 40 years, the heat treating industry has experienced a significant shift in the type of hot zone most commonly used in furnaces. In the 1970s, most of the heat zones installed were all-metal hot zones. Today, however, the vast majority are graphite-based hot zones. But, what is the most efficient design in order to minimize hot zone losses and reduce power consumption?

阅读文章...

您是否想要了解本篇博客谈到的某个话题?

如果您对某篇文章有任何看法或有任何问题咨询,我们都非常欢迎。