Pubblicato il 4/12/2021
Categorie: Aerospaziale

AMS 2750F pyrometric requirements for heat treatments: calibrating process instrumentation

There are many innovations introduced by AMS (Aerospace Material Specifications) 2750 revision F concerning the process instrumentation.

We will analyze the 4 new requirements requested by the legislation and the necessary precautions regarding the instrumentation calibration.

We will conclude by listing in detail all the information to be reported on the instrument calibration certificates.

...leggi tutto l'articolo.

Pubblicato il 2/9/2021
Categorie: Aerospaziale

AMS 2750F pyrometric requirements: what changes for the equipment of heat treatment furnaces

Revision F of the AMS (Aerospace Material Specifications) 2750 introduces three important changes concerning the equipment of the instrumentation of the heat treatment furnaces.

Which are the changes to the uniformity requirements required by the technical specifications of the process and by the technical specifications of the material?
How are the types of instrumentation of heat treatment plants classified?
And finally, what is the new D+ instrumentation type?

...leggi tutto l'articolo.

Pubblicato il 12/14/2020
Categorie: Aerospaziale

AMS 2750F pyrometric requirements for heat treatments: what’s the comparative SAT

Revision F of the AMS (Aerospace Material Specifications) 2750 introduces many new features, in particular there are limitations on the alternate SAT and some conditions in which it is necessary to replace it with the comparative SAT.

What is the comparative SAT?
What are the operational procedures of the comparative SAT?
Is it possible to effectively measure the maintenance of the qualification performance of our plant and consequently the operational continuity?

...leggi tutto l'articolo.

Pubblicato il 11/10/2020
Categorie: Aerospaziale

AMS 2750 pyrometric requirements for heat treatments: what's new in revision F

AMS 2750 (Aerospace Material Specifications) is an aerospace international specification which covers the pyrometric requirements for plants used for the heat treatment of metallic materials. Specifically, it covers temperature sensors, instrumentation, plant equipment, correction factors and offsets of instruments, system accuracy testing and temperature uniformity testing. These are necessary to ensure heat treatment of parts or raw materials in accordance with applicable specifications.

The AMS 2750 is now in revision F, was revision E from July 2012.

Let's see what’s new.

...leggi tutto l'articolo.

Pubblicato il 9/11/2020
Categorie: Applicazioni

How to properly debind parts produced by metal additive manufacturing

Additive manufacturing is a manufacturing technology that is gaining more and more ground among metallurgists. The process involves all the techniques used to create 3D metal objects from a digital design.

The notable increase in the world of metal additive manufacturing of the use of methods such as the Metal Injection Molding (MIM), the Binder Jetting (BJ) and the Fused Deposition Modeling (FDM), prompted TAV VACUUM FURNACES to design and install a vacuum furnace for thermal debinding in its Research and Development laboratory, in order to experiment the best solutions for this delicate post-production phase.

Let's find out what debinding is, how it is obtained and above all which are the most suitable tools to create high quality components without risking contamination.

...leggi tutto l'articolo.

Ti piacerebbe vedere trattato un particolare argomento su questo blog?

Se hai un’idea per un articolo o hai semplicemente una domanda da farci, saremo lieti di ascoltarti.